Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SNMP source on CSS

Is there any way to set the source of SNMP traps? We don't use management interface therefore it has 0.0.0.0 as IP address. When CSS generates an SNMP trap it sets SNMP source as 0.0.0.0 which is a problem for many SNMP tools to recongnize a real source of traps.

Thanks

2 REPLIES
Cisco Employee

Re: SNMP source on CSS

is it the ip address of the ip packet on the network ??

Or is it the ip address contained in the snmp header ?

Do you have a sniffer trace showing this ?

There is a command 'snmp trap-source' but it only modifies the ip address within the snmp header.

You can give it a try so and see if this works for you.

Regards,

Gilles.

Thanks for rating this answer.

New Member

Re: SNMP source on CSS

Source in the SNMP hearder. IP header looks correct.

I'll try that command tomorrow.

Thanks!

282
Views
0
Helpful
2
Replies
CreatePlease to create content