Trying to poll time from Catalyst 2924. PIX is doing this just fine. CSS can ping ip address of the switch and other verse. I can see with debug that requests coming to the switch and ntp packets are sent back.
Can somebody help?
Below is some additional info.
P.S. After reboot and issue sntp server ... command it stay in up state but looks like packets never received and after 180 seconds it goes DOWN.
CSS1# sh clo
TimeZone: PST: -08:+00:+00
CSS1# sh run
sntp poll-interval 60
sntp server 192.168.100.111 version 3
CSS1# sh ver
Version: ap0610107a (6.10 Build 107)
Flash (Locked): 4.01 Build 32
Flash (Operational): 6.10 Build 107
Licensed Cmd Set(s): Standard Feature Set
Enhanced Feature Set
Nov 6 12:15:39 PST: NTP: rcv packet from 192.168.100.121:
Nov 6 12:15:39 PST: leap 0, mode 3, version 3, stratum 0, ppoll 1
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...