Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Sorry server connection much slower

I have a CSS configured for server failover in one armed mode on the ouside Interface of PIX firewall.

During failover the secondary server is at DR site, so data path is through PIX to inside network across DS3 to DR PIX DMZ.

The path from PIX through inside network to PIX is encapsulated in a VPN tunnel for security of client information.

The secondary during failover is extremely slow from Internet.

I am thinking there could be an MTU issue and fragmentation.

pinging with "do not fragment" flag set shows only 990 bytes getting through without fragmentation.

Is there anything that can be done on the CSS to help this issue?

2 REPLIES
Cisco Employee

Re: Sorry server connection much slower

why do you think this is a CSS issue ??

From your information, there is no evidence the css is doing anything wrong.

I would suggest to perform a test from a controlled client, capture sniffer traces at different places and see where the delay is coming from.

Gilles.

New Member

Re: Sorry server connection much slower

I wasn't thinking the CSS was causing the problem, but was asking if there was something that could be done if there is packet fragmentation.

The HQ side server responds normally, the DR on is slow.

I captured a trace from my workstation and can see fragmentation of the packets.

127
Views
5
Helpful
2
Replies