Is possible to do this. In case that I have two servers belong to serverfarm. If the two servers going down, is possible to create a "sorry server" in a server in another context?? In the same context I understand that function ok, but in another context not.
The ACE contexts are isolated from each other. You could use a sorry server in another context, but you would have to go to another device to bridge or route the traffic to the other context. This means getting creative with the traffic routing using VRFs and NAT. This would create a bridge between your two ACE contexts. If they are in separate security zones you would not want to do this.
It would be best to create a local sorry server for this context to use.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...