my 6513 (on slot 11 port 26 )is connected to Proventia (ibm) mgmt port;
and i have installed SiteProtector on other Server, i can ping, but not access thru http, my boss told me to config rspan or span and find that port number of which is to be connected to switch from site protector
The switch does not support a combination of local SPAN and RSPAN in a single session. In other words, an RSPAN source session cannot have a local destination port, an RSPAN destination session cannot have a local source port, and an RSPAN destination session and an RSPAN source session that use the same RSPAN VLAN cannot run on the same switch.
For the Configuring Local SPAN, Remote SPAN (RSPAN) follow the configuration guide
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...