Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SSL Module cuestion

Hello!

We are planning an IOS up-grade for a Cat6500 (SUP720).

Installed on chassis, we have a SSL Module with a ssl-proxi service, trustpoint and certs loaded.

Is there any risk to loose some or all SSL Module configuration (certs included)?

Do you know any other special procedure (other than simple "reload" or power supply off), with the SSL Module present on chassis?

Thanks in advance...

Pedro

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SSL Module cuestion

Pedro,

the SSL module keeps its config and cert/keys onboard. So, upgrading the IOS on the Sup720 will not affect the SSLM.

Just make sure the new IOS supports the SSLM.

Gilles.

3 REPLIES
Silver

Re: SSL Module cuestion

Go through this Catalyst 6500 Series Switch Content Switching Module with SSL (CSM-S) Installation and Configuration Note.

For configuration and installation assitance.

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csms/2.1.1/configuration/guide/icn.html

Cisco Employee

Re: SSL Module cuestion

Pedro,

the SSL module keeps its config and cert/keys onboard. So, upgrading the IOS on the Sup720 will not affect the SSLM.

Just make sure the new IOS supports the SSLM.

Gilles.

New Member

Re: SSL Module cuestion

Thanks for your help Gilles...

We made the up-grade last weekend, and the switch and services are working ok.

Best Regards

Pedro

128
Views
0
Helpful
3
Replies