Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

SSL Module Rebooted Randomly

One of our SSL module rebooted randomly. Anybody know the why this could happen?

We are running 2.1(12) software. The SSL module is housed in a Catalyst 6513, which is running Version 12.2(17d)SXB9.

I see the following log messages:

Mar 12 11:56:20: SP: The PC in slot 2 is shutting down. Please wait ...

Mar 12 11:56:42: SP: PC shutdown completed for module 2

Mar 12 11:56:42: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset

)

Mar 12 11:57:04: %CSM_SLB-6-RSERVERSTATE: Module 1 server state changed: SLB-NET

MGT: Server 10.255.254.58 failed ARP request

Mar 12 11:57:32: SP: OS_BOOT_STATUS(2) AP OS Boot Status: finished booting

Mar 12 11:58:22: %CSM_SLB-6-RSERVERSTATE: Module 1 server state changed: SLB-NET

MGT: Server 10.255.254.12 failed ARP request

Mar 12 11:58:38: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimum Diagnostics..

.

Mar 12 11:58:38: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics

Mar 12 11:58:39: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disab

led.

Mar 12 11:58:39: %FABRIC-SP-5-LINECARDMODE_BUS_FORCED: The switching mode of mod

ule in slot 2 is forced to bus-mode.

Mar 12 11:58:39: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now

230
Views
0
Helpful
0
Replies
CreatePlease to create content