I've configured a CSS for SSL termination. When testing the page on HTTPS I receive a certificate. I can see the initial three pages but when I try browse further I notice the lock on the Internet explorer disappears and only a few links are returned after a long wait. I've confirmed the servers are working correctly by connecting to them directly on http. Any help would be appreciated.
What I could smell here is, it could be that SSL packets are missing on transit. Check the duplex/speed settings on the servers with the Layer2 switch or the CSS. Better they need to be hard coded rather than left in Auto-neg.
We had the same issue sometime ago similar to what you are telling us.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...