I configured an ACE for SSL termination and it works fine if I open the url from a PC in my LAN. If I access the url from the internet (ADSL) it however doesn't work. I captured the traffic and see that when I come from the internet the ACE sends a FIN, ACK packet in response to the SSL Client Hello packet.
The only difference here is the source address (LAN, internet). Any idea?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...