STICKY based on calling station ID for radius flow
I need to understand when the sticky entry is created for the radius flow. So If I have a sticky based on calling station IS, I need to know if the entry on the sticky table based IMSI is cretae when the SLB receive the access-request or the access response? I know that for the framed-ip sticky data base I need to receive the access response, but for calling station id what happen?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...