Cisco 6509 connects to the Bluecoat via VLAN 20 & to Cisco 10 K via VLAN 30. The clients are connected to the internet via 10K. Cisco 6509 connects to the internet via ATM link. We have RPR ring as well, which also connects to the internet. When we do the cut-over (i.e, close the ATM link and connect the 6509 via Gigabit Ethernet link to RPR), websites don't get open. The configurations in Cisco 6509, Bluecaot and 10K remains the same in both the cases. Whereas, there is a successful ping from the client to the internet. So, there is no problem in the routing. The http site gets open also, when the spoofing is enabled on the Bluecaat. I have attached the WCCP debug taken from 6509 as an attachment. I am not able to attach the packet capture due to size limitations. Please help me out of this problem. It's driving me crazy.
Thank you very much for your reply. Could you please tell me why you gave this solution? Sorry for asking this, but i didn't understand. Please explain. If you need any trace information, i can send it to you on your mail.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...