Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

syslog and 11051

I have configured my 11051 to talk to my syslog server, but I do not receive any messages from it. Has anyone had any luck with this?

8 REPLIES
Cisco Employee

Re: syslog and 11051

could you tell us what you configured so we can see if something is missing.

What is the version you are running also ?

Gilles.

New Member

Re: syslog and 11051

I run a KIWI syslog server that handles logging for a PIX 525, a 7204, 3 AS350s, and a Lucent MAX 4000. Al of them talk to the KIWI server without a problem.

On the CSS 11051 the OS is a bit peculiar to me, and documentation is scant, but here is what I have:

Logging host < ip address for the syslog server> facility6

Logging buffer 10000

When I type "show installed-software" the device returns: "ap0500045"

Bronze

Re: syslog and 11051

If you're using CiscoWorks2000 for syslogging, they are not compatible. I've run into the same issue. CW2K is probably receiving the messages but is throwing them away.

New Member

Re: syslog and 11051

You are right. You can see the entries from the CSS being received by the unix syslogd. In my case, it is in /var/log/syslog. But, CW2K server doesn't understand them. Very frustrating.

New Member

Re: syslog and 11051

Hi,

Have you set the trap level ?. Try this:-

logging trap notifications

Regards Brett

New Member

Re: syslog and 11051

Hi Bret,

"logging trap" is not a valid command on the 11051.

New Member

Re: syslog and 11051

Have you tried also configuring the logging subsystem so that the CSS is logging events as it is configured as default at logging level 4, and if there is no events to log it will not work.

If you try the following command it will log at debug level and will be able to test whether the CSS is sending messages to the syslog server or not.

"logging subsystem all level debug-7 "

New Member

Re: syslog and 11051

The CSS is sending syslogs to CW2k - they show up clearly in the logs. It is just that the CW2k syslog scraper doesn't understand them.

197
Views
0
Helpful
8
Replies
CreatePlease login to create content