we have some trouble with TACACS on the CSS. We have configured all relevant stuff on the box, but we will receive no successfull replay from the Server, when we use our RADIUS Server then the reply will be done very nice and successfully. The Setup is the easiest way the Server will be in the same subnet as the CSS. ANy hints or tricks ?
The log from CSS is this :
SEP 5 02:59:28 1/1 9 SECURITY-7: SECMGR:SecurityAuth:Request from 0x00004b07
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...