06-12-2006 06:58 AM
Hi we have two csg on ft and what I notice is that still everything coes ok, the tcp connection remain allways on INIT or REQ_WAIT state and never ESTAB.
Do you know why this happen?
Thanks
Ira
06-16-2006 10:37 AM
Try BUG - CSCdy61507
06-20-2006 12:06 AM
I am not able to see this bug, can you give me the description og this one?
Thanks
Ira
06-20-2006 02:30 AM
the ddts title was : "Beowulf: Sessions on standby CSM do not close after session timeout"
However, I do not think it does apply to your case.
Is this for HTTP traffic ? Or what type of traffic ?
Is this a rule that requires spoofing the connection ?
Do you have absolutely no connection in estab ?
What CSG version do you run ?
Gilles.
06-20-2006 03:46 AM
Yes this is wap traffic so HTTP traffic for wap2.0 and udp traffic for wap1.0. In both case tha connection remain in INIT state for udp traffic and in REQ_WAIT state for the TCP traffic still everything is going ok.
In TCP 18 10.220.24.62:46618 213.26.205.1:80 REQ_WAIT
Out TCP 14 213.26.205.1:80 10.220.24.62:46618 REQ_WAIT
In UDP 18 10.107.34.1:1646 192.169.0.55:1813 INIT
Out UDP 14 192.169.0.55:1813 10.107.34.1:1646 INIT
In UDP 18 10.220.40.62:8502 10.204.45.144:49200 INIT
Out UDP 14 10.204.45.144:49200 10.220.40.62:8502 INIT
Thanks
Ira
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide