Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Telnet to vip

Hi,

I am unable to telnet to vip address 10.19.17.2 port 80 on CSS from the box pluged into vlan 112, Am I missinfg any thig in my config below? I can telnet to the actual server 10.19.17.1

-----

service WEB

ip address 10.19.17.1

keepalive type tcp

keepalive port 80

port 80

protocol tcp

active

content WEB-VIP

add service WEB

vip address 10.19.17.2

protocol tcp

port 80

active

acl 12

clause 30 deny tcp any destination nql Interfaces range 20 23

clause 40 bypass any any destination any

apply circuit-(VLAN112)

2 REPLIES
Cisco Employee

Re: Telnet to vip

you need a permit in your acl.

The bypass means no traffic can hit any of the content rule.

So replace the bypass with a permit.

Gilles.

New Member

Re: Telnet to vip

Thanks,

its working now after replacing bypass with permit.

Regards,

119
Views
4
Helpful
2
Replies