Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Traffic interception using ACE instead wccp

Hi,

I am probbing balancing the core WAEs with ACE. Most our servers are not balanced, their dft gw is not the ACE and we saw that when I am not using a VIP, the ACE does not do a nat and the traffic goes directly through 6500. The questions is: Can we use WAAS&ACE when the servers's company are not balanced by the ACE?

Thank in advanced.

Celeste

3 REPLIES
Cisco Employee

Re: Traffic interception using ACE instead wccp

Yes you can, but you need to guarantee that all traffic goes through ACE.

You can place the ACE module in transparent/bridge mode between your WAE's and their gateway.

Gilles.

New Member

Re: Traffic interception using ACE instead wccp

Gilles.

Do you have an example with ACE where traffic going to Datacenter is intercepted by a PBR (that PBR sends traffic to the ACE) and traffic going to the branch is intercepted with another PBR(that PBR sends traffic to the ACE too)?

New Member

Re: Traffic interception using ACE instead wccp

try this. I think it matches your requirement exactly

205
Views
0
Helpful
3
Replies