Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

transfering the existing SSL certificate from the 11503 to the ACE

Hi ,

I am new to ACE , We now have a new requirement . We are replacing existing pair of CSS with ACE 4710 appliances. The problem here is that I can see from the configuration that  some SSL certificate installed in CSS .Is it possible to transfer the existing SSL certificate from the 11503 to the ACE? Or, do we need to generate a new key pair and CSR on the ACE?  Is there any document available to know the steps for the same. Your help in this will be highly appreciated.

Regds

Ravi

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

transfering the existing SSL certificate from the 11503 to the A

Hi Shibi,

You should be able to export both the key and certificate from the CSS and import them into the ACE.

To export the certificate from the CSS, you just need to do the following:

  • Use the "CSS# show ssl files" command to find the filenames of the certificate and key you want to export
  • Use the command "CSS# copy ssl ftp export "

Once exported, you can export these to the ACE using the instructions documented at

http://www.cisco.com/en/US/partner/docs/interfaces_modules/services_modules/ace/vA5_1_0/configuration/ssl/guide/certkeys.html#wp1012347

I hope this helps

Daniel

2 REPLIES
Cisco Employee

transfering the existing SSL certificate from the 11503 to the A

Hi Shibi,

You should be able to export both the key and certificate from the CSS and import them into the ACE.

To export the certificate from the CSS, you just need to do the following:

  • Use the "CSS# show ssl files" command to find the filenames of the certificate and key you want to export
  • Use the command "CSS# copy ssl ftp export "

Once exported, you can export these to the ACE using the instructions documented at

http://www.cisco.com/en/US/partner/docs/interfaces_modules/services_modules/ace/vA5_1_0/configuration/ssl/guide/certkeys.html#wp1012347

I hope this helps

Daniel

New Member

transfering the existing SSL certificate from the 11503 to the A

Thanks Daniel, Will try this .

832
Views
0
Helpful
2
Replies
CreatePlease login to create content