cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
329
Views
0
Helpful
1
Replies

transparent caching configuration

bissrached
Level 1
Level 1

Dear All

I'm configuring transparent-caching as in the attached configuration, still it is not working.

any advice?

When a client try to connect, i have a flow bilding between the client and destination (shown by show flows), but i'm not able to find any flow corresponding to the cacheserver or to the interface to which the cache is connected; no hits shows on the cache log; the requested web page will time out at the end

Regards

1 Reply 1

Gilles Dufour
Cisco Employee
Cisco Employee

is your cache doing ip spoofing ?

If so, follow the following example

http://www.cisco.com/en/US/products/hw/contnetw/ps546/products_configuration_example09186a00801adbe2.shtml

Also, for troubleshooting do a 'sho summary' and verify that you have hits on your content rule.

With all your bypass acl, not sure if there is a hit.

If there is a hit, check if the traffic is forwarded to the cache [verify counters on the cache] or use a sniffer.

Verify that the cache is opening a connection to the destination [sniffer].

Gilles.