Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

transparent caching configuration

Dear All

I'm configuring transparent-caching as in the attached configuration, still it is not working.

any advice?

When a client try to connect, i have a flow bilding between the client and destination (shown by show flows), but i'm not able to find any flow corresponding to the cacheserver or to the interface to which the cache is connected; no hits shows on the cache log; the requested web page will time out at the end

Regards

  • Application Networking
1 REPLY
Cisco Employee

Re: transparent caching configuration

is your cache doing ip spoofing ?

If so, follow the following example

http://www.cisco.com/en/US/products/hw/contnetw/ps546/products_configuration_example09186a00801adbe2.shtml

Also, for troubleshooting do a 'sho summary' and verify that you have hits on your content rule.

With all your bypass acl, not sure if there is a hit.

If there is a hit, check if the traffic is forwarded to the cache [verify counters on the cache] or use a sniffer.

Verify that the cache is opening a connection to the destination [sniffer].

Gilles.

149
Views
0
Helpful
1
Replies