Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Transparent HTTP Authentication with Smartfilter

We're testing Smartfilter and now we're trying to get transparent http authentication to work with it. We can get authentication working, just not transparently. We're testing smartfilter 4.0 server with the authentication piece loaded. We're on acns v5.3.5b6. We're using wccp. We're using ldap but have also tried ntlm with same result. What else do I need to do?

Thanks,

Tom

2 REPLIES
Silver

Re: Transparent HTTP Authentication with Smartfilter

You might find this document useful which explains with a configuration example on how to configuring HTTP Request Authentication with CE Running ACNS 5.0.1 and Microsoft Active Directory

http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_example09186a00801a644d.shtml

New Member

Re: Transparent HTTP Authentication with Smartfilter

Thanks for the reply. After scratching our heads for awhile we found out we actually had the CE and smartfilter configured correctly.

We were told by an engineer at Smartfilter to change a security setting in the IE browser. That worked.

In IE, select security tab, internet, custom level and check the box at the bottom of the screen that says allow automatic login with current username, password.

Thanks,

Tom

289
Views
2
Helpful
2
Replies
CreatePlease login to create content