Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Transparent mode with WCCP v2

Hi all.

I config my content engine 7305 with configurations:

CE(config)# wccp version 2

CE(config)# wccp router-list 1 10.10.10.1

CE(config)# wccp web-cache router-list-num 1

And with router:

Router(config)# ip wccp web-cache

Router(config)# interface Serial0

Router(config-if)# ip wccp web-cache redirect out

Address Router: 10.10.10.1/24

Address CE: 10.10.10.2 /24

Client1 connect internet with url: http://www.vnexpress.net

Client2 connect the same URL many times.

But when I use: sho statistic http saving

The hit is a little.(1 hit)

The miss is alot. (49 miss)

So I don't understand the ContentEngine work perfect or not????

Help me, plz

Thanks

1 REPLY
New Member

Re: Transparent mode with WCCP v2

You should check to see if your CE and router see each other.

CE "show wccp routers" - you should see the ID of your router you have configured.

Router "show ip wccp web-cache view"

If that doesn't work you can turn on debug

"debug ip wccp packets" and see the request/response sequence

.Jun 16 17:46:26: WCCP-PKT:S00: Received valid Here_I_Am packet from 10.1.1.1 w/rcv_id 00000844

.Jun 16 17:46:26: WCCP-PKT:S00: Sending I_See_You packet to 10.1.1.1 w/ rcv_id 00000845

137
Views
0
Helpful
1
Replies