We would like to move a tcp connection (not http) between host 1 and server 1 to host 1 and server 2 when server 1 has to be go under maintenance. A CSS would be used.
If we put the server 1 in "out of service" mode, all new connections go to server 2, which is fine.
However, host 1 has a persistent tcp connection to server 1. The goal is to transparently move the connection between the CSS and server 1 to CSS and server 2. In other words, only the back end connection would be reset.
The configuration would be as follows,
persistence reset remap
vip address ...
add service server1
add service server2
If we want to schedule maintenance, the following commands would be issued:
remove service server1
Would that configuration move all tcp connnections from server1 to server 2 transparently to host1?
If there is a solution for the CSS, is there a solution for the CSM?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...