Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

UDP booster with 2 client interfaces

Hi,


We are using an ACE with 2.3.0 software with UDP booster for nameserver traffic. It's working fine, but now we want to add a second client interface to the ACE context. Is it possible to also use UDP booster on this interface for nameserver traffic to the same nameservers as with the first client interface?

Regards,

Heine

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: UDP booster with 2 client interfaces

I believe this is ok to have 2 client interfaces.

I do not see any restriction like this in the documentation http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/classlb.html#wp1281598

Gilles.

1 REPLY
Cisco Employee

Re: UDP booster with 2 client interfaces

I believe this is ok to have 2 client interfaces.

I do not see any restriction like this in the documentation http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/slb/guide/classlb.html#wp1281598

Gilles.

720
Views
0
Helpful
1
Replies