Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

unable to telnet on port 80 via VIP on the same circuit vlan the real servers are in

Hi,

I have came across this situation where client unable to access the URL using VIP on the same circuit vlan but they access the URL via VIP frm another vlans.

I tried to telnet the VIP on port 80 frm source vlan int on CORE switch & its not working. However, its working for other vlans.I can ping the VIP IP frm that vlan but unable to access the url using VIP

Also i can access the URL using hostnames instead of VIP frm the vlan the real servers are in.

Can anyone help me on this issue?

Thanks

Manish

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: unable to telnet on port 80 via VIP on the same circuit vlan

Try to configure client nat.

What you descrive if often the result of the server responding directly to the client when they are located in the same subnet.

If not, try to give ip addresses VIP, server and client.

Gilles.

4 REPLIES
Cisco Employee

Re: unable to telnet on port 80 via VIP on the same circuit vlan

Try to configure client nat.

What you descrive if often the result of the server responding directly to the client when they are located in the same subnet.

If not, try to give ip addresses VIP, server and client.

Gilles.

New Member

Re: unable to telnet on port 80 via VIP on the same circuit vlan

Hi Gilles,

Thanks for your reply.I will try to configure Client NAT.

If possible can you provide me the link for Configuring Client NAT on CSS?

Thanks & Regards

Manish

Cisco Employee
New Member

Re: unable to telnet on port 80 via VIP on the same circuit vlan

Hi ,

Thanks for your help. I configured client NAT and the issue has been resolved.

Thanks for your help always.

Thanks

Manish

534
Views
0
Helpful
4
Replies
CreatePlease to create content