Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Understanding traffic flow to and from Content Engine and Clients

I am attempting to document the traffic flow from our Web clients to our Content Engine, then out to the Internet and back.

Currently we have a CE500 Content Engine employed to Cache Web requests. It talks to our Core SW/RTR which is a 4506 with a SUP II +. I have "ip wccp web-cache redirect in" configured on all of my production VLAN Interfaces. When a client makes a web request, it is redirected to The content engine which resides in its own VLAN.

I have been using a sniffer in the VLAN where the Content Engine resides (VLAN 4). I expected to see for Web sites that are already loaded on the content engine the client make a request to the address of the Content Engine, and then the Content Engine address respond to the client. This was my expectation as the CE should not have to go out to the Web to aquire content which it already has.

The behavior I am observing is quite different.

I can filter on the IP address in Sniffer of the content Engine. When i do so, I see it making lots of requests out to public IP addresses. But I never see Public IP addresses returning content to the CE. What I see instead is public addresses which seem to be responding back to Web client addresses.

If someone can help clarify what is happening here I would greatly appreciate it.

Thank You.


Re: Understanding traffic flow to and from Content Engine and Cl

The Content Engine works in tandem with a router to handle web traffic, including user requests to view pages and graphics (objects) on World Wide Web servers-whether internal or external to your network.

To deploy Cisco Content Engines with Cisco Cache software within your existing network, your network must support Cisco IOS software and the Web Cache Communication Protocol (WCCP). WCCP redirects Hypertext Transfer Protocol (HTTP) traffic to a Content Engine, and the Content Engine responds to those requests.

For further information click this link

New Member

Re: Understanding traffic flow to and from Content Engine and Cl

I already understand how the Content Engine works with the router. In my post I had mentioned where wccp was configured. I am not sure that you read my post in detail.

Thanks for trying.