Upgrade of the ACE module

[ola.haglund]

I have an Cisco ACE module SW release c6ace-t1k9-mz.3.0.0_A1_4a.bin

I plan to upgrade to an A2 Release

c6ace-t1k9-mz.A2_1_2.bin

I can not find any upgrade instructions

[jteixido]

The upgrade process was pretty simple. Don't forget to update both ACE modules before you make any configuration changes. If you do not have the same licenses on both ACE modules, the ACE modules will not replicate.

John...

[ola.haglund]

Thanks.

/Ola

[ciscocsoc]

Hi,

The upgrade process is described in the Adminstration Guide - Appendix A. You should also read the Release Notes for the new version.

One thing to note is that "to upgrade your ACE software to version A2(1.x), your ACE must be running software version

3.0(0)A1(5a) or higher."

- so you'll need to do an intermediate upgrade.

HTH

Cathy