Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading 4700 Series ACE Software from Appendix A of Admin Guide

We have an ACE 4710 device and want to update the software to the latest version (c4710ace-mz.A1_8_0a). We are following the instructions on the Upgrading Your ACE Software document and got as far as the software is loaded on the device, but when I enter a reload command, it doesn't come up with the new software. A "Show Bootvar" command shows the updated software is there but it has the old software also, see the following:

Boot Variable "image:/c4710ace-mz.3.0.0_A1_7a.bin;image:/c4710ace-mz.A1_8_0a.bin"

Config register is 0x1

I entered the "No boot system image:" command thinking that this would unset the previously configured boot variable, but it didn't seem too.

Any insight? Thanks, Chris.

1 REPLY
New Member

Re: Upgrading 4700 Series ACE Software from Appendix A of Admin

Hopefully this is something simple and someone will respond...We have an ACE 4710 device and want to update the software to the latest version (c4710ace-mz.A1_8_0a). We are following the instructions on the Upgrading Your ACE Software document and got as far as the software is loaded on the device, but when I enter a reload command, it doesn't come up with the new software. A "Show Bootvar" command shows the updated software is there but it has the old software also, see the following:

Boot Variable "image:/c4710ace-mz.3.0.0_A1_7a.bin;image:/c4710ace-mz.A1_8_0a.bin"

Config register is 0x1

I entered the "No boot system image:" command thinking that this would unset the previously configured boot variable, but it didn't seem too.

Any insight? Thanks, Chris.

135
Views
0
Helpful
1
Replies