Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

uplink router load balance

Hello,

I would like to know if there is a way to load balance the outgoing traffic from the server´s farm to the clients through several default gateways, or at least return the incoming traffic from their respective router.

There are several commands that sounds appropiated for this feature but I am not sure:

ip source-route

ip record-route

ip ecmp

Also It seems to me like a FW load balance configuration but without the external switch

Beforehand thanks for your comments

Rodolfo Gomez

  • Application Networking
2 REPLIES
Cisco Employee

Re: uplink router load balance

'ip source-route' and 'ip record-route' are standards ip feature (source-routing, record routes, ...) and will not help you here.

However, ecmp is the CSS routing algorithm that wil ldo exactly what you need.

That is you can have multiple routes for one destination and the CSS will use the one from which the incoming traffic came in.

New Member

Re: uplink router load balance

OK,

I appreciate your help.

Thank you.

148
Views
0
Helpful
2
Replies