Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

url limited access

Hi, There:

I have two URLs on the same server same port,

/test1/

/test2/

I want to give all users access /test2, but I only want to give user at network range 10.0.0.0 255.0.0.0 to access /test1, how should I do that?

Thx

5 REPLIES
New Member

Re: url limited access

it looks like I am missing something here

acl 10

clause 10 permit any 10.0.0.0 255.0.0.0 dest content mine/test1

clause 20 permit any 10.0.0.0 255.0.0.0 dest content mine/test2

clause 30 permit any 10.0.0.0 255.0.0.0 dest any

clause 40 deny any any dest content mine/test1

clause 50 permit any any dest content mine/test2

Cisco Employee

Re: url limited access

never tested this.

But if your acl above does not work, what you can try is create a fake server or a server with a denied access message.

Then replace your clause 40 with

clause 40 permit any any dest content mine/test1 prefer fake_server.

Gilles.

New Member

Re: url limited access

Hi, Gilles:

from previous ACL, all users on 10.0.0 network could access everything, but other user could not access test1 and test2, is there anyway to work around this?

thx,

New Member

Re: url limited access

BTW, I use one-armed configuration, if I do not use ACL, is there any other solutions?

thanks

New Member

Re: url limited access

I figured it out.

thx,

115
Views
0
Helpful
5
Replies