Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

use of client nat pools on the CSM

Hi Guys,

Just a quick questions about the use of NAT POOLS, which the configuration guide is a little scant for information.

If a client NAT pool such as this is used (16 addresses):

natpool POOL1 10.1.5.0 10.1.5.15 netmask 255.255.255.240

I just want to make sure that port address translation (PAT) will be used by the CSM if the number of sessions exceed the number of IP addresses available in the NAT pool?

I hope this makes sense!

thanks

Sheldon

2 REPLIES
Cisco Employee

Re: use of client nat pools on the CSM

the CSM does PAT by default.

Gilles.

New Member

Re: use of client nat pools on the CSM

thanks giles!

Sheldon

164
Views
5
Helpful
2
Replies