Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

View real user IP (nat)

service C1

ip address XXX.XXX.29.130

active

content Test2

vip address XXX.XXX.29.143

protocol tcp

add service C1

active

group clients-group

vip address XXX.XXX.29.143

add destination service C1

active

In XXX.XXX.29.130 not view user IP (only XXX.XXX.29.143)

How to transfer IP address user to a server XXX.XXX.29.130. For example through in header http or in url.

3 REPLIES
Bronze

Re: View real user IP (nat)

Hi,

The CSS is not able to do add such header to the packet. While using 'add destination service' under the group configuration, you would need another device to add the required information to the packet, or fix the routing on your network to avoid the need to such command under the group configuration. Without the group, you would be able to see the client's IP on the server. Thanks!

Regards,

Jose.

New Member

Re: View real user IP (nat)

Thanks

1) What is another device for add required information to the packet?

2) if to update soft on CSS?

Cisco Employee

Re: View real user IP (nat)

the CSM and the ACE module are both Cisco loadbalancers that can insert info in the http header.

This feature does not exist in the CSS and there is currently no plan to add it.

Gilles.

116
Views
5
Helpful
3
Replies