In my network I have some servers that need to access an application on another server. In order to grant redundancy and load balancing I would like to install a second server. As the servers that act as clients and the servers that act as server are in the same network, I would like to know if it is possible to configure the VIP and the services IP addresses in the same network ?
Yes you can have the services and vips in the same subnet. The key thing you must remember is that the CSS must see the incoming and outgoing packets from the servers. The most successful/safe way is have the servers pluged directly into the CSS.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...