Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vlan 100 &vlan 100 client

in the ff. link

the sample configuration has the ff. command lines;

1. ip slb vlan 100 client

ip address

2. interface Vlan100

ip address

anyone could explain their role in the configuration?

thanks a lot.

Cisco Employee

Re: vlan 100 &vlan 100 client

the slb vlan can be client or server.

You have to see the SLB part as a separate device with its own interfaces.

The interface vlan is the MSFC interface.

This one is a standard interface and does not need the client/server type definition.

You have to see the setup like this

...MSFC.................. SLB

....| int vlan 100.........|..ip slb vlan 100 cl


I would suggest you to read the IOS SLB configuration guide if you need to know the difference between a client vlan and a server vlan.


New Member

Re: vlan 100 &vlan 100 client

ip slb vlan 100 is for the client and

ip slb vlan 200 is for the server

what i cant get is that, it configures an ip address on the msfc part of vlan 100 while not on the vlan 200