I need a little help regarding a problem with vrrp, I have two CSS11501 doing load balancing for some servers which are configured with vrrp box to box redundancy, i see a point of failure with the redundancy link in if this fails both boxes would assume mastership and all manner of problems would arise. Can you run two links for this connection and would spanning-tree block one regarding the loopback? And if so i assume it would need to be tweaked that it kicked in faster than the vrrp can switch over mastership? Is there anyone who has tried this or is there an easy way to do it which i am stupidly missing???
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...