Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

VRRP issue on CSS both CSS become Master same time!!!!

Hi All,

We have 2 content switches(CSS11509-K9) and i want to impement VRRP.Both of the switches are getting Master when i configure it.

It was working fine previously on another location i removed it and connected in my company and here is the problem.

I have also tried to interconnect the cSS over just one switch but it didn't work..

Kindly let me know if i am doing anything wrong here or is there any issue with the STP or the vlans or FW blocking multicast IP traffic 224.0.0.18 and IP protocol number 112.

Any help would be greatly appricaited. Thanks in advance

2 REPLIES
New Member

Re: VRRP issue on CSS both CSS become Master same time!!!!

One possibility is that this site is already using the virtual router number you have configured. While this may not be likely, it is worth checking.

New Member

Re: VRRP issue on CSS both CSS become Master same time!!!!

Hi,

Try disabling the ACL and then reconfige the ACL's to permit any protocol and enable the ACL's.

Example:-

acl 10

clause 20 permit any any destination any

apply circuit-(VLANabc)

this should solve your issue.

Plz rate if this help.

Regards,

Shariff

233
Views
0
Helpful
2
Replies
CreatePlease to create content