i have a redundant CSM configuration in 2 6509 chassis. After synchronizing the configuration the standby machine gives this output: %CSM_SLB-6-INFO: Module 9 info: SLB-NETMGT: vserver (null) out of service
there is no vserver (null) configured on my machines. All configured vservers are operational after the sync, on both machines. I have two redirections configured, and the two special "vservers" have an ip address 0.0.0.0, that are the vserver (null) i guess.
The unmanaged mode is also known as Network only switching, which is introduced in Brazos release. It adds the flexibility for customer to use only network automation for service appliance.
If a device is configured a...
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...