Re: Vserver with single TCP port redirect to reals with differen
I assume you're referring to ACE?...
You pretty much have it in your original post. A config snippet might look like:
serverfarm host ServerFarm
rserver Server192.168.1.1 1000
rserver Server192.168.1.1 1001
The ACE will answer on whatever port you've configured (in your case, port 80), and then, since you specified the port in the serverfarm config, the ACE will forward the request on the port you specified instead of inheriting it from the VIP configuration.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...