Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WAAS - Central manager not working

Dear all

I have received lately, 3 waas devices

1 for central manager and 2 Application accelerator,

So i was connecting them, and found a strange behaviour in the Central manager,

when i finished the CLI configuration, i tried to login to the GUI interface of the central manager, and I couldn't get to the usual Central manager interface, i got a weird one

 

the existting Version was 4.0.17

 

I upgraded the 3 devices into WAAS-4.1.1a.10 and still have the same error

I need urgently to fix this issue ASAP

 

I attached the Configuration of the central manager, and the gui interface that i am getting

 

 

 

  • Application Networking
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: WAAS - Central manager not working

Hi,

Have you reloaded the CM after you assigned it the role of Central Manager? It is still in Application Accelerator Mode with all the policies at the bottom. Try reloading it and then see if CMS comes up. In "sh cms info" it's role should say Central Manager and CMS processes should be started.

Thanks,

Dan

4 REPLIES
New Member

Re: WAAS - Central manager not working

And note that i am unable to register any appliance with the central manager, although there is PING connectivity between them.

Core-WAE(config)#cms enable

Registering WAAS Application Engine...

Sending device registration request to Central Manager with address 10.4.1.222

Failed to contact CDM 10.4.1.222(Unmarshaled: 9001). Please check connectivity with CDM device and status of management service on CDM.

register: Registration failed(512).

cms: unable to register node

FAILED to enable management services

Core-WAE(config)#

Cisco Employee

Re: WAAS - Central manager not working

Hi,

Have you reloaded the CM after you assigned it the role of Central Manager? It is still in Application Accelerator Mode with all the policies at the bottom. Try reloading it and then see if CMS comes up. In "sh cms info" it's role should say Central Manager and CMS processes should be started.

Thanks,

Dan

New Member

Re: WAAS - Central manager not working

here are the results

CentralManager#show cms info

Device registration information :

Device Id = 165

Device registered as = WAAS Central Manager

Current WAAS Central Manager role = Primary

CMS services information :

Service cms_httpd is running

Service cms_cdm is running

CentralManager#show license

License Name Status Activation Date Activated By

-------------- ----------- --------------- --------------

Enterprise active 11/18/2008 admin

CentralManager#

the GUI interface worked properly after the reload.

although, after I upgraded the version, I did restore factory-default and enter the configurations from start

anyway the problem is solved, thank you all.

HOPE THE DEMO WORKS FINE :)

Silver

Re: WAAS - Central manager not working

Try CMS deregister force on CM and WAEs.

This will clear all CMS info / database.

Then cms enable

Chances are it is also configured as an acclerator

1205
Views
0
Helpful
4
Replies
This widget could not be displayed.