WAAS - CIFS - File opening is fast, file saving is slow...
We are in the middle of a demo on version 4.1.1b. Browsing and opening files is very fast, however when saving a file, especially in MS Word, it takes much longer than expected. It is taking 4 to 5 seconds to open the file (application and all), but about 20 seconds to close and save the file/app. Even small 50Kb files take this long, even if we don't change anything in the file.
We did notice one thing, these saves are going to a DFS share back at the main office. When we perform the same test on a non-DFS share, it only takes about 9 seconds. Could this be the reason? The same test locally on the LAN is sub second. Any ideas?
Re: WAAS - CIFS - File opening is fast, file saving is slow...
This was my second posting with no response, however I've been working on this issue and I did find something interesting that I am going to post here just in case someone else experiences this. My DFS share issue may have been a fluke, I couldn't recreate it.
Anyway, I turned off the 'Allow Background Saves' option in Word. This decreased the save time from 20 seconds to 8 seconds. Maybe this will help someone else in the future.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...