I am having problem with my WAAS which is unable to get sync with the CM or the remote peer. I have tried forced all devices with the same timezone & even manually set the device clock by " clock set" but however I still see the minor alarm from the CM.
All devices (2 application accelerator + 1 CM) are running on version: 4.0.15.
are you using a module or the box? the module sometimes lose its time when the right command is not used especially when the router is shut down. You can try this method
1.configure one of the routers to be the ntp server
2. set the right time zone on the router with the right offset
3. update the software clock on the the wae with the command ntpdate server ip. after that tune the timezone on the wae to be the timezone you want it to be; clock timezone command. if the timezone dont sync. you should be okay with this.
The graphs is fine but just the alarm that annoyed me. I've tried manually set the date/time of the WAE by "clock set" to sync with the CM, but the alarm still there even the date/time of both the WAE & the CM is identical during compare via CLI.
WAAS code: 4.0.15
I am using 612 (CM) & 2 X 7371.
Thanks for your suggestion, I will try that out again & will post my update here later.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...