Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WAAS error message

Hi there,

Seeing the following syslog message every couple of mins on a WAVE-574 running 4.1.3 -

2009-05-14 11:27:00 Local0.Warning 10.37.1.5 2009 May 14 10: kernel: %WAAS-SYS-4-900000: time.c: can't update CMOS clock from 75 to 27

2009-05-14 11:28:00 Local0.Warning 10.37.1.5 2009 May 14 10: kernel: %WAAS-SYS-4-900000: time.c: can't update CMOS clock from 76 to 28

TIA,

4 REPLIES
Cisco Employee

Re: WAAS error message

Brian,

This message means that the system clock is more than 15 minutes off from the time set by NTP. Try the following:

1. Disable NTP.

2. Set the system time with the command 'ntpdate'.

3. Enable NTP.

Regards,

Zach

New Member

Re: WAAS error message

I am also getting this error, and I have checked the clock on  the inline devices and the CM and all are set insync.  Any other ideas?

kernel: %WAAS-SYS-4-900000: time.c: can't update CMOS

Cisco Employee

Re: WAAS error message

Hi Brian,

You have posted to the wrong community. Could you please move your thread to "Wide Area Application Services (WAAS)" community?

New Member

Re: WAAS error message

This thread is over a year old. I don't think the WAAS community existed when I posted it. FWIW we had to RMA the WAAS with this error.

903
Views
0
Helpful
4
Replies
CreatePlease to create content