Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

waas - ftp - checksum problem

Hi,

I've a server configured for http and ftp services in DC. HTTP service is working correctly but ftp not. On wae there is a session for ftp traffic but for customer there is no any result. In branch there is PBR and in DC - wccp. I noticed by server side "tcp checksum error", but I cannot find out why only for ftp? I've branches for which there is no problem at all. Configuration is the same for all branches (PBR). Other issue is that in the same connection (branch-DC) there is lotus optymalization and http on others servers working well in production.

I've 4.1.1c.16 version.

any idea?

Thanks

4 REPLIES
Bronze

Re: waas - ftp - checksum problem

ACE can perform deep packet inspection on HTTP, FTP, DNS, ICMP, and RTSP traffic. Inspections include port 80 misuse, RFC compliance, content/header/URL checksum, FTP reply spoofing, and many others. ACE can also analyze traffic for malformed packets and take corrective action. In a ACE load balanced WAAS context, ACE is in the optimization path, so these deep packet inspections cannot be performed. ACE contexts outside the optimization path can be configured with the deep packet inspection.

New Member

Re: waas - ftp - checksum problem

There is no ACE in the path :)

So, the problem still exist and as I checked by testing - this is not tcp checksum problem. :)

- from few sites everthing is working ok but from few sites (the same architecure) there is only http working but not ftp (on the same server).

I've no idea what's is wrong :( on wae there is session from client to the server but connection on client is hang.

So, any idea? :-)

Regards

New Member

Re: waas - ftp - checksum problem

I had issues with FTP and WAAS where the client WAE wout send A FIN packet Before the Core WAE was finished tranfering the Data. This resulted in corrupted files or in your case checksum error.

see CSCsx82342

We upgraded to 4.1.3(55) thi sresolved the issue.

New Member

Re: waas - ftp - checksum problem

Thanks for reply,

checksum incorrect is no problem, I've resoleved my case by configuring new classifier only for ftp traffic. This helped (earlier configuration was working for half of braches - new is working for all and this was my goal)

Thanks,

486
Views
0
Helpful
4
Replies