Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WAAS FWSM Issue

At a high level I have the following scenario:

Client-EdgeWAE-(WAN)-CoreWAE-6500-FWSM-External Host

Actually have 2 core 6500's with FWSMs and a single WAE core device (4.1.3). I have VLAN 100 assigned to the FWSM as the inside interface. Doing inbound wccp 61 on vlan 100 and inbound 62 on the WAN VLAN.

When the client accesses a server in VLAN 100, full optimization occurs. When a client tries to access anything beyond the FWSM, no optimization occurs. The edge WAE indicates no peer for the connection and the core WAE indicates asymmetric.

All other internal optimization and redirection is working fine.

Any thoughts on why optimization beyond the FWSM does not work? I did configure inspect WAAS on the FWSM and that didn't help.

3 REPLIES
Cisco Employee

Re: WAAS FWSM Issue

Michael,

Is it possible that traffic coming back through the FWSM is coming into the 6500 through a different VLAN?

Would you mind providing a copy of the 6500 and FWSM configuration?

Thanks,

Zach

Community Member

Re: WAAS FWSM Issue

Zach - The FWSM route to the edge networks point to the VLAN 100 HSRP address on the 6500's.

I can't provide the entire configs, but can probably post the relevant pieces.

Thanks.

-Mike

Community Member

Re: WAAS FWSM Issue

See attached txt file.

402
Views
0
Helpful
3
Replies
CreatePlease to create content