WAAS HTTP Accelerator / MPLS and IWA Authentication
I have actually a problem when using WAAS Version 18.104.22.168. In Branches what are connected by MPLS to the headquarter, the IWA-Authentication with the Internet-Proxy-Server located in the Headquarter is no longer working. IWA gives the Client the choice to Authenticate the HTTP session by either Kerberos or NTLM. I could drill down the problem that when I disable the http Accelerator in the Policy the users can authenticate without any problem.
As soon as http Accelerator is switched on all the users get after while page could not be displayed when they try to browse Internet.
Did anyone recognize such a problem? Any good tipp how to get that solved would be appreciated.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...