Got a client that does alot of heavy printing accross a private VPN tunnel. The link is connected to an ASA5520 on one end and the other end has a 5510
one of the sites in the US and the other in Austraila. The client is complaning about slow print across the links. BTW, the link is a 2 Meg link between the site. My question: If I install WAAS in this enviroment, will it allow for better speed in printing the files? Also, I have done some reseach, I just want to be sure that WAAS will work across a VPN tunnel. Thanks!
Yes WAAS should just work fine with VPN There are many customer who are doing that but it might be worth your while to verify the specific application rules on the WAAS and see if your application is affected. Print services should get optimized though.
For installation and how it should be installed in customer's network i would suggested getting in touch with local Cisco pre-sale team and get POC done or see in lab how it goes.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...