cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
360
Views
0
Helpful
1
Replies

WAAS Inline & HSRP Deployment

krattiger
Level 1
Level 1

I'm running in a problem where auto-discovery is failing. We have remote-offices with one router and one wae in inline deployment, so far so good, this works perfect.

On the Main-Office we have two routers for redundancy, on the lan site we use hsrp.

Can I use both inline-cards two for each router ?

-----|- inlinegroup1---hsrp-router1-|--mpls

lan--|- inlinegroup2---hsrp-router2-|

or do I have to put both routers behind one pair of inline-card ?

-----|- inlinegroup1-|-hsrp-router1-|

lan--|- inlinegroup1-|-hsrp-router2-|--mpls

Kind Regards

-Lukas

1 Accepted Solution

Accepted Solutions

Zach Seils
Level 7
Level 7

Lukas,

If traffic for a connection flows asymmetrically through both inline groups, then CSCsk47177 can prevent optimization. This is schedule to be fixed in the next WAAS maintenance release.

Thanks,

Zach

View solution in original post

1 Reply 1

Zach Seils
Level 7
Level 7

Lukas,

If traffic for a connection flows asymmetrically through both inline groups, then CSCsk47177 can prevent optimization. This is schedule to be fixed in the next WAAS maintenance release.

Thanks,

Zach

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: