I am assuming you are inquiring about configuring a Standby Central Manager address. You only have to configure the primary CM in the WAE config (central-manager address x.x.x.x or hostname) and if your system has a standby CM already registered to the Primary CM, then the Standby CM's address is replicated to the WAE via the CMS database. You shouldn't have to configure anything as long as CMS is running.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...