WAAS - Major error (secured_client_detected )

[jorjes1984]

sel

branch#test s

branch#test self-diagnostic all

running test `basic'

running test `connectivity'

running test `interfaces'

running test `tfo'

running test `wccp'

running test `inline'

running test `system'

running test `wafs'

------------------------------------------------------------

Diagnostic Report performed on 2/24/2009 14:5:56

Test NOTE [basic]

NOTE NO_NTP_CFG Device ntp time synchronization is not configured

Action:

Use 'ntp server' cli command to configure NTP server.

Test PASS [connectivity]

Test NOTE [interfaces]

NOTE IFACE_DOWN Interface GigabitEthernet 2/0 is not up

Action:

Use 'interface type slot/group' cli command followed by 'no shutdown' to enable the interface.

Test PASS [tfo]

Test NONE [wccp]

NONE - Skipping test because WCCP is not enabled

Test WARN [inline]

WARN INLINE_SHUTDOWN Inline group 1/1 interface is in bypass mode(shutdown)

Action:

Use 'interface inlineGroup slot/group' cli command followed by 'no shutdown' to enable the interface.

Test WARN [system]

WARN HAS_ALARM 1 Major Alarms are raised in the device. Please find the list below.

1. secured_client_detected

Action:

Critical/major alarms are raised. Check device alarms using 'show alarms detail' cli command for details.

Test NONE [wafs]

NONE - Skipping test because Wafs is not enabled

branch#show

branch#show al

branch#show alarms dew

branch#show alarms dew

branch#show alarms detail

Critical Alarms:

----------------

None

Major Alarms:

-------------

Alarm ID Module/Submodule Instance

-------------------- -------------------- --------------------

1 secured_client MAPI_AO MAPI Instance

Feb 24 13:33:32.230 UTC, Communication Alarm, #000003, 23000:23001

secured_client_detected

Can anyone help what does this error stand for? and how can i remove it?

[dstolt · Accepted solution]

Hi,

This alarm means that there is an outlook client that is using encryption to communicate with the exchange server. So it's definitely not a major alarm to be too worried about.

In version 4.1.1c, this alarm was removed from Major Alarms and moved to only be logged in the syslog. This was logged under CSCsv31679 resolved in 4.1.1c.

Thanks,

Dan

[jorjes1984]

HEy thanks for your help

I'v got another problem

I keep having the following message regarding the WAFS:

Test NONE [wafs]

NONE - Skipping test because Wafs is not enabled

How can i enable it?

I have the enterprise license on both Application accelerator WAE's

Regards,