If we have regonal site connected to H.O using main WAN link and on connected to branches on another router. can we use one WAAS box to optimize both traffic to H.Q on router 1 and traffic coming from branch on router 2 using WCCP ( by connecting first WAAS Physcal port to router 1 and the second port to router 2)
Sorry i didn't mention that in regional office we have two routers one is connecting remoter branches and second one connected to H.Q, so in this case we will use one WAE physical port to be connected to router connected to Branch and the second physical port to be connected to the second router ?
You only need to connect a single interface in the WAAS device. There is no need to dedicated ports on the WAAS device to different network. You only need to make sure that both routers and the WAAS device are running WCCP together.
The unmanaged mode is also known as Network only switching, which is introduced in Brazos release. It adds the flexibility for customer to use only network automation for service appliance.
If a device is configured a...
Usually, we can access ESXi Shell by pressing Alt+F1 from ESXi DCUI (Direct Console User Interface).
But on HyperFlex system, it just shows black window.
This is expected behavior because HyperFlex redirects ESXi Shell output to SoL...
Configuring an Export Policy Using the GUI
This procedure explains how to configure an Export policy using the APIC GUI. Follow these steps to trigger a backup of your data:
On the menu bar, choose Admi...