WAAS - optimized traffic bigger than original traffic?
I am running a couple of WAE devices (4.1.1c), using wccp to talk to cpes in the remote locations and an appliance in the central office. I use wccp access-lists in the central office so only the traffic destined to remote offices with WAE is redirected.
Everything appears to be working ok, but in the CM, in monitor -> network traffic application mix, the inforfmation "Enterprise-Applications" appear with the optimized traffic much bigger(about 3x) than the original traffic (other traffic like http appears right, with a high reduction rate and the optimized traffic much smaller than the original traffic).
Is this behaviour normal? What would be an the explanation to have optimized traffic bigger than original traffic?
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...